Mping logo

Mping beta

Network Topology Monitoring

A network monitor built for live shows. It watches every device on the show network at once and puts them on one screen.

macOS 13 Ventura or later · Apple silicon and Intel · Signed and notarised by Apple

Illustration. Simulated readings.

What Mping shows

The whole rig on one map

Every device is a tile, grouped into the places it sits, such as stage left, FOH or a delay position. Its colour shows its state at a glance.

Links drawn from the switches

Mping draws each cable between switches from what the switches report on their ports, with the port number at each end and the traffic each way.

Fibre light levels

The light lost at each end of a fibre link, in dB, where the module reports it. The link turns from green to yellow when the loss passes your limit.

Temperatures

Switch and fibre module temperatures, for switches that report them, on each tile and in a view of their own.

Two networks, side by side

A redundant rig gets Primary and Secondary tabs, with each network's devices and links on its own map.

Amplifiers and mains power

Amplifier power, Network Audio streams and clock lock, found through the switches they are plugged into. Mains voltage, current and power from a supported power meter.

Checked before it's called offline

A single missed ping doesn't raise an alarm: busy networks drop the odd one. Mping sends four more check pings, a tenth of a second apart, and marks a device offline only when all four fail. The tile then shows when it was last seen, to the second.

It only reads

Mping reads the equipment it watches and doesn't change a setting on it. The one thing it changes is the Mac it runs on: with your permission, asked once at first launch, it makes the small network changes a show needs, such as routes, and undoes them when it quits.